Why water and sewer deserve their own review
Examples from NYC Water Board and Philadelphia Water Department tariffs in effect November 2026. Your utility's rules may differ. Last checked: November 2, 2026.
Water rarely gets the attention electricity does in restaurant utility costs, but the bill has the same structure problem: charges are set by meter size, rate class and parcel data that were fixed when the site opened. The EPA's WaterSense program estimates that hospitality and food service account for about 15% of total water use in U.S. commercial and institutional facilities, with kitchens the largest use in restaurants and restrooms second. For a 20+ unit group, each location has its own utility, its own rules and its own deadlines.
How water and sewer bills are built
Most bills have three parts: a fixed or service charge, a consumption charge for water and sewer, and at some utilities a stormwater charge. How each part is set varies. Here is how the two example utilities do it:
| Bill part | New York City (NYC Water Board) | Philadelphia (Philadelphia Water Department) |
|---|---|---|
| Fixed or service charge | Minimum charge of $0.49 per day per water meter, applied when consumption charges fall below it (no minimum for fire sprinkler meters) | Monthly water service charge by meter size, from $6.17 (5/8") to $203.33 (8") |
| Water consumption | $5.35 per 100 cubic feet (about 748 gallons) | Quantity charge per thousand cubic feet, set in the rate schedule |
| Sewer | Wastewater charged at 159% of the water charge | Monthly sewer service charge by meter size, from $8.62 (5/8") to $431.54 (8"), plus a quantity charge |
| Stormwater | Only for parking lots not supplied with city, river or well water (and not ancillary to a use that is): $0.0907 per square foot of lot area per year | Non-residential parcels: $1.003 per 500 sq ft of gross area plus $7.048 per 500 sq ft of impervious area, plus $2.81 billing and collection, per month |
| Sewer relief for water not discharged | Wastewater Allowance for separately metered commercial or industrial processes; prospective from the complete application; 5-year term | Sewer credit when at least 5% of water used, or 225,000 cubic feet a year (whichever is less), is not discharged; effective from the submission date of an approved application |
| Leak relief | Leak Forgiveness Program: partial forgiveness if conditions and 120-day deadlines are met | Ask the Department about its adjustment process |
Sources: NYC Water Board, Water and Wastewater Rate Schedule, effective July 1, 2026 · Philadelphia Water Department, Rates and Charges (FY2026–2027) · Philadelphia Water Department, Non-residential stormwater billing
Philadelphia's sewer quantity charge includes a portion that is subject to annual reconciliation, so the per-unit figure can move during the year. Check the current rate document before budgeting on it. New York City's rate year starts July 1, and the Water Board adopted a 6.0% increase to metered and unmetered water and wastewater rates for FY2027 on June 10, 2026.
The checklist, location by location
1. Build the account inventory
For each location, list the utility, account and meter numbers, meter size, rate class, read type (actual, estimated or automatic), who is billed (owner, landlord or tenant) and who receives copies. In New York City, property owners must register to receive bills, and DEP will send a duplicate copy to one other party, such as a managing agent, on request. At leased sites, that copy is how the operator sees the bill.
2. Separate estimated reads from actual reads
Flag runs of estimated bills and the true-ups that follow them. Ask each utility how it estimates. New York City's schedule says DEP may issue estimated bills when it can't read a meter or the reading looks questionable, and that when a meter fails, water is charged on the consumption of a representative period before or after the failure.
3. Check meter size against need
Where service charges scale by meter size, a larger meter costs more every month whether or not the water is used. At Philadelphia's rates effective September 1, 2026, the monthly water service charge is $6.17 on a 5/8" meter and $22.40 on a 2" meter, and the sewer service charge is $8.62 and $44.99 on the same sizes. Ask the utility whether a downsizing process exists. Philadelphia's rate document includes an "over-metered" provision for some customers whose meter is too large for their requirements. Keep fire service separate from domestic service and leave fire service to your fire protection engineer.
4. Find sewer charges on water that never reaches the sewer
Cooling towers, irrigation and other metered processes can use water that is never discharged to the sewer. Some utilities offer relief if that water is measured. New York City's Wastewater Allowance covers water used exclusively for a commercial or industrial purpose and separately metered; its standard list includes air conditioning and refrigeration systems of 25 tons and more using recirculated water at 85%. The allowance is prospective only, from the date a complete application is filed, and expires after five years (cooling tower allowances renew automatically if registrations stay current). Philadelphia's sewer credit applies when at least 5% of water used, or 225,000 cubic feet a year, whichever is less, isn't discharged; it is measured by a meter the Department accepts or a credit factor, a $1,700 review fee applies to non-meter methods, and "no credits shall be made retroactively." Because relief starts when you apply, the order is: identify, meter, apply.
5. Catch leak spikes inside the adjustment window
Compare each location's daily usage with its own history; a spike is the trigger. Adjustment windows are short. Under New York City's Leak Forgiveness Program, the leak must be repaired within 120 days of the bill date (DEP can extend this by up to 180 days with a plumber's proof), the average daily flow must be at least 200% of the most recent representative bill, DEP must be allowed to inspect, and the request must be made in writing within 120 days of the bill date. The bill can be reduced by up to one half, but not below 150% of the representative charge. Put each utility's window on the calendar.
6. Check stormwater charges on owned or ground-leased pads
Where stormwater is billed on parcel area, check that the billed gross and impervious areas match the site plan. Philadelphia bills non-residential parcels $1.003 per 500 square feet of gross area plus $7.048 per 500 square feet of impervious area and $2.81 billing and collection each month, with a minimum of $20.89 plus $2.81. Where a property has more than one water account, Philadelphia divides the stormwater charge equally among them. Philadelphia's Credits and Appeals Manual applies an 80% maximum credit factor to managed impervious area that doesn't discharge to a surface water body (higher factors apply only with an industrial stormwater permit or direct surface discharge), and credits expire every four years. At leased sites, check whether the charge is passed through, and ask counsel or the landlord about lease terms. BPH doesn't interpret leases.
7. Test landlord and submeter pass-throughs
Where a landlord bills water by submeter or allocation, ask for the underlying utility bill and the allocation method, and compare the two. The same check belongs in occupancy costs reviews and in acquired-store diligence when utility accounts transfer.
8. Budget 2027 by each utility's rate year
Rate years don't follow the calendar: New York City's starts July 1 and Philadelphia's current rates took effect September 1. Budget each location on its utility's adopted rate and effective date, and don't project rates that haven't been adopted. Add renewal and filing dates to your vendor rebid calendar.
9. Assign an owner and a cadence
Give each region one owner. Review bills monthly or quarterly. Keep a log of every credit, allowance and filing with its expiry date (five years for a New York City Wastewater Allowance, four years for a Philadelphia stormwater credit).
What this checklist doesn't cover
Kitchen equipment, operating practices and menu decisions. This is a billing and tariff review, not an operations change. For electricity and gas, see the energy contract renewal checklist. For the other cost lines that drift without anyone noticing, see hidden restaurant costs.
How Basis Point Hospitality helps
BPH reviews utility bills location by location against each utility's published tariff, builds the account inventory and filing log, and takes eligible requests to the utility with you. Stores and guests see no change. Our model: we find $1, you pay us 20 cents. Utilities are one of about 30 vendor relationships BPH reviews. Across all categories together, BPH client results run about 5% of sales; every group's result depends on its own bills and contracts. For a published example across categories, see our utilities and retention case study.
Sources
NYC Water Board, Water and Wastewater Rate Schedule, effective July 1, 2026 (FY2027)
NYC Water Board, FY2027 rate adoption public notice
Philadelphia Water Department, Rates and Charges, FY2026 and FY2027
Philadelphia Water Department, Non-residential stormwater billing
Frequently asked questions
Frequently asked questions
It depends on the utility. Many tie sewer to metered water. New York City charges wastewater at 159% of the water charge, and Philadelphia bills a monthly sewer service charge by meter size plus a quantity charge. Check your utility's tariff.
Some utilities allow it when the water is measured. New York City has Wastewater Allowances for separately metered commercial processes, and Philadelphia credits commercial users when at least 5% of water used (or 225,000 cubic feet a year, whichever is less) isn't discharged. Both are prospective from the application.
It does where service charges are set by meter size. Philadelphia's monthly water service charge effective September 1, 2026 ranges from $6.17 for a 5/8-inch meter to $203.33 for an 8-inch meter. Ask your utility whether it has a process to downsize an oversized meter.
Repair it, document the repair, and ask your utility about leak adjustments within its deadline. In New York City, the written request is due within 120 days of the bill date.
A charge for runoff from a property. Philadelphia bills non-residential parcels on gross and impervious area and offers credits for managed impervious area.
No. This is a review of bills and tariffs. Operating and equipment decisions stay with you.
Continue the review
Takeaways
Audit water and sewer by location, against each utility's own tariff.
Where service charges scale by meter size, check whether each meter fits the site's need.
Sewer relief for water that isn't discharged usually starts when you apply, so identify, meter and apply.
Leak adjustment windows are short; in New York City the written request is due within 120 days of the bill date.
Check stormwater parcel areas, and log every credit with its expiry date.
Explore the program
Franchisee profitability programRelated reading
Restaurant utility costs: tariffs, demand charges, and billing errorsWinter Energy Supply-Contract Renewal Checklist for Multi-Unit RestaurantsThe Annual Non-Food Vendor Rebid Calendar for 20+ Unit Restaurant GroupsTalk to BPH. We find $1, you pay us 20 cents.
Bring 12 months of water, sewer and stormwater bills for each location.
Talk to BPHOr estimate your number with the restaurant savings calculatorOr estimate your number with the restaurant savings calculator